MBD® Model 3620NFFS
Non-Ferrous Foundry Bandsaw
The MBD Model 3620NFFS
Non-Ferrous Foundry Bandsaw is a specially equipped version of the
standard Model 3620 Bandsaw, designed to be used in various non-ferrous foundry applications. The machine frame is fabricated from arc welded structural steel and all mounting surfaces are machined in one set up, assuring proper mechanical alignment.
The saw has a standard 7½ hp TEFC main motor and multi v-belt motor-to-hub drive. Standard saw band speed is 4,700 ft./min. for carbide-tipped bandsaw blades, other blade speeds are available. The bandsaw is also equipped with a 6" diameter dust collection spout. MBD 36" cast aluminum wheels are standard and come with "E-Z" change rubber and steel tires.
This model is equipped with a 36"×37" cast iron main worktable and a 16"×19" auxiliary worktable.
The auxiliary worktable is between the main table and the machine column. The Model 3620NFFS Bandsaw also has two-wheel automatic brakes, which can stop the wheels in approximately 1½ seconds. The upper and lower wheel housing doors have interlocks to prevent the bandsaw from starting
if either door is open.
Click here for MBD® Model 3620NFFS Non-Ferrous Foundry Bandsaw PDF literature.